Mastering the Art of Bedding Your Remington 700 for Precision

Mastering the Art of Bedding Your Remington 700 for Precision

If you’re serious about achieving top-notch accuracy with your Remington 700, bedding is one of the most crucial steps you can take. “Remington 700 bedding” refers to the process of creating a solid, stable interface between the rifle’s action and its stock. This meticulous attention to detail can significantly enhance your rifle’s accuracy and shooting performance, making it a fundamental aspect of gunsmithing techniques and firearm customization.

Understanding the Importance of Bedding

Bedding is essentially about ensuring that the rifle action is perfectly aligned within the stock. A poor bedding job can lead to a variety of issues, including inconsistent shot placement and diminished rifle accuracy. When the action isn’t held firmly in place, vibrations from firing can affect bullet trajectory. Proper bedding minimizes these issues, allowing for greater consistency and precision in shooting.

Types of Bedding Materials

There are various materials used for bedding, and each has its own advantages:

• Epoxy Bedding: This is the most common method, using a high-strength epoxy to fill any gaps and create a solid bond between the stock and action.
• Glass Bedding: A more traditional approach, glass bedding involves using a glass-like substance to create a rigid interface. It is highly durable and resistant to environmental factors.
• Foam Bedding: Lightweight and easy to apply, foam bedding can also provide decent accuracy, though it may not be as robust as epoxy or glass options.

Preparing for the Bedding Process

Before diving into the bedding process, you’ll need to gather the right tools and materials:

• Quality bedding compound (epoxy or glass)
• Release agent (to ensure your action doesn’t get stuck in the stock)
• Sandpaper and files for smoothing surfaces
• Masking tape to protect areas you do not want to bed
• Clamps to hold the action in place while the bedding cures

Step-by-Step Guide to Bedding Your Remington 700

Now, let’s break down the process of bedding your Remington 700 into manageable steps:

1. Disassemble the Rifle

Start by carefully removing the action from the stock. This usually involves unscrewing a few screws. Keep track of all parts for reassembly.

2. Prepare the Stock

Clean the area where the action will sit. Use sandpaper to slightly roughen the surface. This will help the bedding compound adhere better. Be careful not to sand too much; you want a snug fit, not an overly loose one.

3. Apply Release Agent

To avoid having the action permanently bonded to the stock, apply a release agent to the action and any areas of the stock that could come into contact with the bedding compound.

4. Mix and Apply Bedding Compound

Mix your bedding compound according to the manufacturer’s instructions. Apply a generous amount to the stock where the action will rest, ensuring even coverage.

5. Reinsert the Action

Carefully place the action back into the stock, pressing it down firmly into the bedding compound. Make sure it is aligned properly, as this will affect your rifle’s accuracy.

6. Clamp and Cure

Use clamps to hold the action in place while the bedding compound cures. Follow the curing time recommended by the compound manufacturer, typically 24 hours.

7. Clean Up

Once the bedding compound has cured, remove the clamps and carefully clean up any excess bedding material from around the action. Sand or file down any rough edges to ensure a clean finish.

8. Reassemble the Rifle

Put your Remington 700 back together and conduct a thorough inspection to ensure everything is functioning correctly.

Benefits of Proper Bedding

When done correctly, bedding your Remington 700 can bring about several benefits:

• Enhanced Accuracy: A well-bedded rifle will have improved consistency in shot placement, vital for precision shooting.
• Improved Stability: A solid connection between the action and stock minimizes movement during firing, leading to better overall performance.
• Reduced Wear: Proper bedding reduces the wear on the rifle’s components, contributing to longevity and better gun maintenance.

Common Mistakes to Avoid

Even seasoned gunsmiths can make mistakes during the bedding process. Here are a few pitfalls to watch out for:

• Not Using a Release Agent: Forgetting this crucial step can lead to a nightmare of removing the action from the stock.
• Over-applying Bedding Compound: Excess bedding can lead to a poor fit, affecting accuracy.
• Rushing the Curing Process: Patience is key. Allow the compound to cure fully before attempting to use the rifle.

Maintaining Your Rifle Post-Bedding

Once your Remington 700 is properly bedded, it’s essential to keep up with routine gun maintenance. Regularly check for any signs of wear or damage, and ensure that the bedding remains intact. A well-maintained rifle will always perform better, especially in precision shooting situations.

FAQs about Remington 700 Bedding

1. How can I tell if my Remington 700 needs bedding?

If you notice inconsistencies in your shot placement, or if your rifle experiences significant recoil movement, it may be time to consider bedding.

2. Can I bed my rifle myself, or should I hire a gunsmith?

While many enthusiasts successfully bed their rifles, if you’re unsure or uncomfortable with the process, hiring a professional gunsmith is advisable.

3. How long does bedding last?

With proper care and maintenance, a good bedding job can last for many years. Regular inspections will help identify any issues early.

4. What if I make a mistake during the bedding process?

It’s possible to remove the bedding compound and redo the job. Be patient and meticulous to achieve the best results.

5. Does bedding affect the resale value of my Remington 700?

Quality bedding can enhance the rifle’s performance and may increase its resale value, especially among precision shooters.

6. Are there aftermarket stocks that come pre-bedded?

Yes, many aftermarket stocks are designed with bedding features, which can save time and enhance accuracy out of the box.

Conclusion

Mastering the art of bedding your Remington 700 is a skill that pays dividends in accuracy and shooting performance. By understanding the importance of proper bedding and following the steps outlined above, you can elevate your rifle’s capabilities significantly. Remember, like any aspect of firearm customization, practice and patience are key. With dedication, you’ll not only improve your rifle’s performance but also deepen your appreciation for the craftsmanship involved in gunsmithing.

For further reading on advanced gunsmithing techniques, check out this resource. And if you’re looking to explore more about firearm maintenance, visit this site.

This article is in the category Tricks and created by beddinghacks Team